Huayin Water Treatment Materials CO.,LTD

Product Introduction: 　 Poly aluminium chloride chemical formula is high-efficient, cheap and nontoxic inorganic high molecular compound. The liquid is colorless or light yellow and transparent; the solid is light yellow powder. It is easily soluble in water. In the hydrolytic process, it is accompanied with the chemical processes such as electrochemistry, coagulation, absorption and precipitation. Properties: 　　 1. Good effective and lower cost. Its purifying effect on low-temperature, low-turbidity and heavily organic polluted raw water is much better than other organic flocculant, furthermore, the treatment cost is lower. 　　 2. Flocculation ability .It can lead to quick formation of flocculant with big size and rapid precipitation service life of cellular filter of sedimentation basin. 　　 3. PH broad in scope.It can adapt to a wide range of pH value (5-9), and can reduce the pH value and basicity after processing. 　　 4.Adopting to various source of water. The dosage is smaller than that of other flocculants. It has wide adaptability to the waters at different temperatures and at different regions. 　　 5.Higher basicity, lower corrosive, easy for operation, and long-term use of non-occlusion. Application: 　　1,Purification of drinking water and special treatment of water supply . Such as removing iron, fluoride etc. The treatment of blast furnace gas washing water. 　　2,The treatment of Oil field refilling water, metallurgy, coal washing, leather and chemical waste water. Industrial production applications: Paper glue dyeing, printing and dyeing, cement, refractory material, precision casting, medical, and cosmetic industries. Product Advantages: 　　1) higher quality and lower cost of water purification by the PAC than that by aluminum sulfate coagulant 　　2) fast formation of flocculating constituent and settling velocity 　　3) low consumption of alkalinity in water with no or less adding of alkaline agent 　　4) low corrosivity 　　5) better solubility than aluminium sulfate Notes: 　　1)Before using, the solid product shall be diluted to Al2O3 liquid, and the normal dilution ratio is 5%-15%. 　　2) The liquid product can be used directly or used after dilution. 　　3) The specific dosage is based on the flocculation tests and site trial. The usual dosage of the liquid product is 3-40 g/ton,and of the solid product is 1-15 g/ton. 　　4) The shelf life is 6 months for diluted liquid product and 12 months for the solid product. Packaging: This product is packaged with plastic film braided bag with plastic lining. Net weight: 25kg/bag.